Makita 13 Piece Power Tool Kit 18V LXT 3 x 5.0Ah Battery & Charger T4TKIT-256

• 3 x 5.0Ah BL1850 Batteries
• 1 x DC18RC Charger
• 1 x 26" Tool Bag
• 1 x 20" Tool Bag
• 1 x DTD152 Impact Driver

Makita 13 Piece Power Tool Kit 18V LXT 3 x 5.0Ah Battery & Charger T4TKIT-256

Features:

Makita DTD152:

Electric Brake
Variable speed control trigger
Forward/reverse rotation
Twin LED job light
High rotation speed
One-touch bit installation
Ergonomically designed soft grip handle
Compact overall length of 137mm
Lightweight design
Battery protection circuit
Belt clip

Makita DHP482:

Electric brake
Mechanical 2-speed control
Variable speed control trigger
Forward/reverse rotation
Twin LED job light
Ergonomic soft grip handle
Compact overall length of 198mm
Single sleeve keyless chuck
Lightweight design
Battery protection circuit
All metal gears

Makita DGA452:

Electric brake
Equipped with Battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current
Forward and reverse trigger
LED job light
Ergonomic soft grip

Makita DTM51:

Tool-less accessory clamp. Lever style lock system allows for quick installation and replacement of accessories.
Ergonomically best possible barrel grip, with a perfect circumference size and shape which fits the hand for extra comfortable handling.
Battery capacity warning lamp Blinking red; Battery power has been nearly used up. Solid red; Battery power has been used up (Battery protector will shut off the power).
Accessories can be installed at 30º increments, across 360º.
Variable speed control dial.
Soft start.
Anti-restart function.
High operating efficiency.

Makita DBO180:

Simple to operate electronic push button switch with 3-speed settings
Connectable to dust extractor
Compact design with short height and lower centre of gravity for better manoeuvrability

Makita DJR186:

Tool-less blade change
Trigger switch with lock-off lever
Electric brake
Variable speed
Ergonomically designed handle
Newly designed crank mechanism for higher efficiency
High power

Makita DHR202:

3-Mode Switch for rotation only, hammering with rotation, or hammering only
2x faster drilling with synchronized RPM and BPM for more efficient drilling
Built-in torque limiter clutch disengages if bit jams when hitting rebar
Chisel rotates 360° with 40 different positions to get the best working
Ergonomic shape fits like a glove with even pressure and easy control
LXT Lithium-Ion provides longer run time, 5x lower self-discharge (for use any time) and 16 firm holding contact terminals (for constant high power)
Electric brake
Forward/reverse rotation
Job light
Rotary hammer action
Rotary only action
Variable speed trigger

Makita DSS611:

22 minute charge time with the air cooled Makstar Optimum Charging System.
Lithium-ion batteries have greater life spans than their Ni-MH or Ni-Cad counterparts giving 430% greater run time.
Lithium-ion's 40% weight saving means 18 volt power can be obtained by a battery that weighs the same as a 12 volt Ni-MH battery.
Double safety trigger.
High comfort grips.
Removable dust nozzle.

Makita DJV180:

Ergonomically rubberised handle provides comfortable gripping and more control while minimising hand fatigue and pain.
The large 2 finger variable speed trigger makes this jigsaw easy to operate even with gloves on.
3 orbital settings + straight cut.
Blower will clear the pencil line of dust.
Lightweight and compact.
Tool-less blade change - push in lock system enables very fast blade changes.
LED light will illuminate your cut line.
Smooth and powerful cutting at the high stroke speed at 2,600 spm.
Double insulated.
Soft start.

Makita DKP180:

Planes a width of 82mm (3¼") in a single pass.
Fitted with a comfortable operator handle.
Easy to use adjustable depth settings.
A precision machined aluminum base allows for planing accuracy and the cutter head makes 14000 cuts per minute for fast stock removal.
The lock -on button gives the operator the option of continuous operation.
Left and right handed use due to the buttons on either side of the handle.
Dust extraction port on the side.
Adjustable up to a 2mm depth of cut.
Shoe on the underside stops accidental laying down of planer while blade is still moving.
Rebates to a maximum depth of 9mm.
22 minute charge time with the air cooled Makstar Optimum Charging System.
Lithium -ion batteries have greater life spans than their Ni -MH or Ni -Cad counterparts giving 430% greater run time.
Lithium -ion's 40% weight saving means 18 volt power can be obtained by a battery that weighs the same as a 12 volt Ni -MH battery.

Makita DDA351:

New compact design with metal gear housing
4 pole LXT motor for improved performance
LED light for job illumination
Large lever switch for variable speed control
Rubber anti-slip handle
Forward/reverse rotation
Electric brake

Makita DTW190:

Electric Brake
Variable Speed Trigger
Forward/Reverse rotation
LED job light
Battery protection circuit
Ergonomically designed handle with rubber made soft grip

Makita DML815:

12 pivoting positions with 0 to 170º swivel range
4 LED bulb for maximum illumination
Lightweight and compact for work in tight spaces
Accessory strap enables tool suspension for hands-free work
54 hours of continuous run-time

Comes with:

3 x 5.0Ah BL1850 Batteries
1 x DC18RC Charger
1 x 26" Tool Bag
1 x 20" Tool Bag

Product Specification:

Makita DTD152:

Barcode: 0088381699099
Battery Type: Li-ion
Voltage: 18V
Driving Shank: 6.35mm (1/4" Hex)
Machine Screw: M4-M8
Standard Bolt: M5-M16
High Tensile Bolt: M5-M12
Coarse Thread: 22-125mm
Impacts per minute: 0-3500 ipm
No Load Speed: 0-2900 rpm
Max Tightening Torque: 165Nm
Sound Pressure: 93 dB(A)
Sound Power: 104 dB(A)
Sound K Factor: 3 dB(A)
Vibration: 10.5 m/s²
Vibration K Factor: 1.5 m/s²

Makita DHP482:

Barcode: 0088381699051
Battery Type: Li-ion
Voltage: 18V
Max. in Masonry: 13mm
Max. in Steel: 13mm
Max. in Wood: 38mm
Max. Fastening Torque: S/H 36/62 Nm
Chuck Capacity: 1.5 - 13mm
Torque Settings: 21 + Drill
No Load Speed Hi: 0 - 1,900rpm
Low: 0 - 600rpm
Blows per Minute Hi: 0 - 28,500bpm
Low: 0 - 9,000bpm

Makita DGA452:

Barcode: 0088381660112
Grinding Wheel: 4-1/2" / 115mm
Max Wheel Diameter: 4-1/2" 115mm
No Load RPM: 10,000
Watt Hours: 54.0
Overall Length: 12-1/2"

Makita DTM51:

Barcode: 0088381667418
Battery Type - Lithium-ion
Voltage - 18V
Shank - OIS
Oscillation Angle - 3.2º
Oscillations per Minute - 6,000 - 20,000
Maximum Output - 390W
Vibration K factor - 1.5m/sec²
Vibration: Sanding - 3.0m/sec²
Vibration: Scraping - 5.5m/sec²
Vibration: Plunge Saw Blade - 7.0m/sec²
Vibration: Sentimental Saw Blade - 4.5m/sec²

Makita DBO180:

Barcode: 0088381658584
Voltage: 18V
Orbits per Minute: 7000/9500/11000 opm
Orbit Diameter: 2.8 mm
Battery Type: Lithium-ion
Sanding Stroke per Minute: 14000/19000/22000 spm
Speed Control: 3 stage push button
Charging Time: 22 min
Pad brake: Yes
Paper Fastening: Hook & Loop
Pad Size: 123 mm
Paper Size: 125 mm
Maximum Output: 190w

Makita DJR186:

Barcode - 0088381806640
Battery Type - Lithium-ion
Body only machine - Yes
Voltage - 18 V
Capacity in Wood - 255 mm
Capacity in Mild Steel Pipe - 130 mm
Strokes per Minute - 0 - 2,800 spm
Stroke Length - 32 mm
Noise sound pressure - 84 dB(A)
Noise sound power - 95 dB(A)
Noise K factor - 3 dB(A)
Vibration K factor - 1.5 m/sec²
Vibration: Cutting Wood - 12.5 m/sec²
Vibration: Cutting Chipboard - 13.0 m/sec²

Makita DHR202:

Voltage: 18v
Shank Type: SDS+ Plus
Capacity in Concrete: 20mm
Capacity in Steel: 13mm
Capacity in Wood: 26mm
Impacts per Minute: 0-4,000 ipm
Impact Energy: 2.0 J
No Load Speed: 0-1,100 rpm
Overall Length: 358 mm
NOISE & VIBRATION:
Vibration: Drilling: 3 m/sec²
Vibration: Chiselling: 11 m/sec²
Vibration: Hammer Drilling: 145 m/sec²
Vibration K Factor: 15 m/sec²
Noise Sound Pressure: 87 dB(A)
Noise Sound Power: 98 dB(A)
Noise K Factor: 3 dB(A)

Makita DSS611:

Barcode: 0088381663014
Voltage - 18V
Depth of Cut @ 90° - 57mm
Blade Diameter - 165mm
Depth of Cut @ 45º - 40mm
Depth of Cut @ 50° - 36mm
Bore Diameter - 20mm
Noise sound pressure - 91 dB(A)
Noise sound power - 102 dB(A)
Noise K factor - 3 dB(A)
No Load Speed - 3700 rpm
Vibration K factor - 1.5 m/sec²
Vibration: Cutting Chipboard - 2.5 m/sec²